CCNA Practical Studies (Cisco Certification & Training)

Configure all routers to have the following:

• Host name (that is, host names are to be according to the number R1, R2, R3, and so on).

• Enable password of falcons.

• Enable console login with password falcons.

• Telnet access (vty 0 4) with password falcons.

• No DNS resolution (no domain name lookups).

• Configure all routers so that the console port will not time out your connection.

• Configure all routers so that messages from the router to the console screen do not append to the command line.

• Configure all routers to show a banner when you log into the console port. In the banner, state which router you are logging into (for example, on Router 1, the banner should read "This is Router 1.")

• Create a host table on all routers using the loopback addresses that you created for each router.

Initially, you will configure a host name on each lab router. Next, you will learn how to manually configure each required lab objective task on R1. After this, you will learn how to write a basic configuration script in Notepad that will configure these same items. This script will then be applied to the remaining routers (R2 through R6) in the lab.