Microsoft Windows Registry Guide, Second Edition

Cloning Windows

The best way to understand disk imaging is to walk through the entire process; you'll learn more about this process later in this chapter, though. (See Figure 15-1 as you're working through the following steps.)

  1. Install Windows on the sample computer.

    Install the operating system from a fully customized distribution folder, as you learned in Chapter 14, “Deploying with Answer Files.” Doing so ensures that you can regression test your disk images after fixing problems. Do not join the computer to a domain; just join a workgroup.

  2. Log on to the computer as Administrator, and do any of the following:

    • Install and customize each application you want to include in the disk image. For example, install Office 2003 Editions. As a rule, don't customize per-user settings on a disk image; save those for a network-based default user profile. (See Chapter 12, “Deploying User Profiles.”)

    • Install any third-party device drivers that are not included in Drivers.cab, the file in which Microsoft distributes the Windows device drivers, and that you didn't add to your distribution folders.

  3. Customize the %SystemDrive%\Sysprep folder.

    Copy Sysprep.exe and Setupcl.exe to this folder. Also, copy the Sysprep.inf file, which you build ahead of time. Sysprep.inf automates Mini-Setup Wizard, a stripped-down version of the full setup program that runs when users start a computer to which you've deployed the disk image. I'll tell you where to get these files in the next section.

  4. Run Sysprep.exe, select the Mini-Setup check box, and then click Reseal.

    If the computer is ACPI-compliant, Sysprep automatically shuts down the PC; otherwise, turn off the computer when you see a message that says that it's safe to shut down the computer.

  5. Clone the disk to an image file.

Figure 15-1 Using disk imaging, you deploy the contents of a sample computer's hard disk to many other computers' hard disks. It's an effective way to deploy many desktops.

After you deploy the disk image to users' computers and they turn their computers on, Mini-Setup Wizard starts. First the wizard detects the computers' Plug and Play devices. Then the wizard prompts users to accept the license agreement, type their name and organization, join a domain or a workgroup, specify regional options, configure TAPI, and choose the networking protocols and services to install. The wizard can skip some or all of these settings if you configure them in Sysprep.inf (the answer file). Last, Mini-Setup Wizard removes %SystemDrive%\Sysprep and restarts the computer. The whole process takes less than five minutes.

Before we move on to actual techniques, I'm going to introduce you to the tools necessary for doing the job. You'll find everything you need for preparing disk images on the Windows CD. The following sections describe these tools, their limitations, and a list of third-party disk-imaging suites to evaluate. (Third-party tools are necessary to duplicate disk images after you prepare them.)

Windows Tools

Disk imaging has two phases: preparing the disk image and cloning the disk image. All the tools you need for preparing a disk image are on the Windows CD in the Deploy.cab file. This file is in the Support\Tools folder; extract its contents by opening the file in Windows Explorer. The disk-imaging tools in Deploy.cab include:

The tools are a given, but I'm excited about the documentation in the file Deploy.cab–it's a huge improvement over the deployment documentation for Windows 2000. First Ref.chm describes how to build answer files and includes a reference that describes all the settings that you can use. Second Deploy.chm describes how to use the disk-imaging tools in Deploy.cab. Deploy.chm also contains a complete reference for all the settings you can use in answer files. This is the resource from which you're going to learn the most about disk imaging.

NOTE

Ensure that you're using the correct version of Sysprep for the version of Windows that you're deploying. Windows XP Service Pack 2 (SP2) contains an updated version of the deployment tools, so you'll need to update your images with them after slipstreaming the service pack into your distribution points.

Sysprep Limitations

Due to the nature of disk imaging–copying a hard disk's image to other computers–Sysprep has a few requirements (call them limitations, if you like):

The Windows documentation also says that the mass-storage controllers (IDE, SCSI, and the like) must be identical on the sample and target computers. This isn't required if you tell Sysprep in advance about the mass-storage controllers that you're anticipating. For more information, see the section titled “Reducing Image Count,” later in this chapter. I've had good results from building images using one mass-storage controller and deploying to computers with completely different mass-storage controllers.

The sample and target computers' remaining devices do not have to be the same. That includes Plug and Play devices, such as modems, sound cards, network cards, video adapters, and so on. If you anticipate devices for which Windows doesn't include native support–that is, the device doesn't have a driver in Drivers.cab–you should include those device drivers in your image so that Mini-Setup Wizard can detect and install them during installation. This usually includes devices that come to market after Windows. Chapter 14, “Deploying with Answer Files,” describes how to deploy third-party device drivers with Windows.

TIP

Often, device drivers that you download from a vendor's Web site aren't suitable for deployment. They install from package files, so you can't easily extract the device driver files and then figure out which files are necessary and which aren't. You can almost always get the latest device drivers from Windows Update, however, and these device drivers are in a suitable format for deployment through an answer file and on a disk image. The trick is to use the Windows Update Catalog. In Microsoft Internet Explorer, click Tools, Windows Update. In the Web page's left pane, click Administrator Options. In the right pane, Windows Update Catalog. Now you can search for and download device drivers that are packaged and ready for deployment.

Third-Party Disk-Imaging Suites

Sysprep only prepares disks for duplication; it doesn't clone them. Thus, you're going to need a third-party tool to deploy disk images. A small selection of the tools with which I'm familiar includes the following:

Symantec Ghost is at the top of my list because it's the tool that I know best and the one that I use most often. It's a robust disk-imaging tool that does much more than just clone disk images. For example, you can deploy a disk image to a remote computer without ever getting up from your desk. You can use it to manage configurations, too, not just disk images. When I talk to administrators around the world, this is the tool that 90 percent of them use, whereas the other tools in the list tend to have a small but loyal following. Regardless, the disk-imaging process is roughly the same with all these tools, and most of them are high quality.

Related

Категории