Special Edition Using Macromedia Studio 8

Operational Details

• NDIS 5.1 Drivers, Wireless cards, and NetStumbler

• Detailed information on all the data collected in the Right Pane columns

• IP Address Look Up will run WHOIS searches on ARIN, RIPE, and APNIC databases

Option Settings

• To get the optimum use from NetStumbler, many of the functions must be set up correctly. Many of those options are located in the Network Stumbler Options dialog box under View | Options. It has four main tabs and multiple suboptions.

• The General tab controls the scanning speeds and automatic adjustment, starting scans when opening a new document, the automatic reconfiguration of a wireless card, querying an AP for names; and saving files automatically.

• The Display tab controls the manner that the Longitude and Latitude are shown.

• The GPS tab controls the port and communications settings for obtaining GPS data.

• The Scripting tab controls the running of external script programs that may interface with NetStumbler.

• The MIDI tab controls the playing of MIDI musical notes.

• NetStumbler comes with ten sound files, which are installed by default. Each sound is associated within the program with a specific action. The standard sounds can be replaced with new sounds of your liking.

Disabling Network Protocols

• Disable network protocols to avoid any possible illegal actions.

• Disable TCP/IP via the command line on Windows 95, Windows 98/98SE, Windows ME, Windows 2000, and Windows XP using IPCONFIG.EXE.

• Alternately, disable TCP/IP via the graphical interface on Windows 95, Windows 98/98SE, and Windows ME using WINIPCFG.EXE.

• Disable TCP/IP on a PocketPC by manually entering an IP address of 0.0.0.0 and a subnet mask of 0.0.0.0.

Additional RF Equipment: Antennae and Cables

• An antenna in the 3dBi to 8dBi range is a good choice for WarDriving.

• A Magnetic Mount makes placing and using the antenna on a vehicle very convenient.

• A pigtail is needed to connect the wireless card to the antenna in most cases.

Using a GPS Receiver with NetStumbler and MiniStumbler

• GPS receivers calculate your position using triangulation from satellite signals.

• NetStumbler uses the GPS information to log the user’s location when a WLAN is detected.

• Both NetStumbler and the GPS must be configured to communicate with each other.

• The GPS must be set up and properly initialized before being used with NetStumbler.

Putting It All Together: The Complete “Stumbling Setup”

• A typical NetStumbler setup includes: Laptop, Wireless Card, Antenna Pigtail, Antenna, GPS, and GPS Serial cable

• A typical MiniStumbler setup includes: iPAQ PocketPC, expansion pack, wireless card, antenna pigtail, antenna, GPS, GPS serial cable, serial synchronization cable for iPAQ, DB9 Gender Adapter, and Null Modem Adapter.

• A minimal MiniStumbler setup includes: iPAQ PocketPC, expansion pack, wireless card, “Puck”- or “Mouse”-style GPS, and GPS serial cable.

• Additional accessories that are helpful: a mobile power supply for the laptop or PocketPC, multiple-socket cigarette lighter adapter, and a DC-AC power inverter.

Exporting NetStumbler Data

• NetStumbler includes three options for exporting the collected data as text.

• Some of the exported data is encoded in hexadecimal form, requiring some knowledge of hex arithmetic for further analysis.

Additional Resources

• NetStumbler Web site: www.netstumbler.com

• NetStumbler Forums Web site: http://forums.nestumber.com

• Marius Milner’s Web site: www.stumbler.net

• NetStumbler listserv: www.michiganwireless.org/lists.html

• NetStumbler listserv archive: www.michiganwireless.org/_archive/maillist.html

• National Marine Electronics Association (NMEA): www.nmea.org/