CCNP: Building Cisco Multilayer Switched Networks Study Guide (642-811)
Write the answers to the following questions:
| 1. | What commands create VLAN 35 on a 4000 series switch named Sales using ports 5 through 9 on card 3? | |
| 2. | What command sets the VTP domain name to Acme and the switch to a VTP client on a set- based switch? | |
| 3. | What command would you use on a 2950 switch to see the configured VLANs? | |
| 4. | What type of frame tagging places a VLAN identifier into the frame header? | |
| 5. | What type of frame tagging encapsulates the frame with VLAN information? | |
| 6. | What protocol handles the negotiation of trunk links? | |
| 7. | How do you configure trunking on a set-based switch, port 1/1, using ISL tagging? | |
| 8. | What command would you use to clear VLANs 10 through 14 from the trunk link 1/1 on a 4000 switch? | |
| 9. | What command displays the VTP domain on an IOS-based switch? | |
| 10. | If the VTP domain is already configured, how would you set a VTP password on an IOS-based switch to “cisco”? | |
Answers
| 1. | set vlan 35 name Sales, set vlan 35 3/5-9 |
| 2. | set vtp domain Acme mode client |
| 3. | show vlan |
| 4. | 802.1Q |
| 5. | ISL |
| 6. | Dynamic Trunk Protocol (DTP) |
| 7. | set trunk 1/1 on isl |
| 8. | clear trunk 1/1 10-14 |
| 9. | show vtp status |
| 10. | vtp password cisco, in vlan database mode |