CCNP: Building Cisco Multilayer Switched Networks Study Guide (642-811)
Write the answers to the following questions:
| 1. | Write the command that enables MLS globally on an external router. | |
| 2. | Write the command that assigns the VTP domain to the external router’s interface. Use cisco as the VTP domain name. | |
| 3. | Write the command that assigns VLAN 5 to the interface. | |
| 4. | Write the command that configures an external router interface to allow MLSP packets across it. | |
| 5. | Write the command that shows you MLS information on a switch. | |
| 6. | Write the command that shows you the XTAG information on a switch. | |
| 7. | Write the command that displays all the layer 3 cache entries. | |
| 8. | Write the command that displays a layer 3 cache entry based on the destination IP address of 172.16.10.100. | |
| 9. | Write the command to clear all MLS cache entries. | |
| 10. | Write the command that sets the fast aging time to 64 and the packet threshold to 63. | |
Answers
| 1. | mls rp ip |
| 2. | mls rp vtp-domain cisco |
| 3. | mls rp vlan-id 5 |
| 4. | mls rp management-interface |
| 5. | show mls |
| 6. | show mls |
| 7. | show mls entry |
| 8. | show mls entry ip destination 172.16.10.100 |
| 9. | clear mls entry destination all |
| 10. | set mls agingtime fast 64 63 |