| bandwidth kilobits | Specifies the bandwidth parameter, in kilobits per second, on an interface. Used by some routing protocols to calculate metrics; has no influence on the actual bandwidth of the data link. |
| delay tens-of-microseconds | Specifies the delay parameter, in tens of microseconds, on an interface. Used by some routing protocols to calculate metrics; has no influence on the actual delay of the data link. |
| ip address ip-address mask [secondary] | Specifies the ip address and address mask of an interface. |
| maximum-paths maximum | Specifies the maximum number of parallel routes an IP routing protocol can support, from one to six, with a default of four. |
| metric holddown | Toggles the IGRP holddown on or off. |
| metric maximum-hops hops | Specifies the maximum number of hops IGRP can advertise before a route is marked unreachable, with a maximum of 255 and a default of 100. |
| metric weights tos k1 k2 k3 k4 k5 | Specifies how much weight the bandwidth, load, delay, and reliability parameters should be given in the IGRP and EIGRP metric calculations. |
| neighbor ip-address | Defines a unicast address to which a RIP, IGRP, or EGP routing update should be send. |
| network network-number | Specifies the network address of one or more directly connected interfaces on which IGRP, EIGRP, or RIP processes should be enabled. |
| offset-list {access-list-number name }{ in out } offset [ type number ] | Specifies a number of hops (for RIP) or additional delay (for IGRP) to be added to the metrics of incoming or outgoing route advertisements. |
| passive-interface type number | Disables the transmission of routing updates on an interface. |
| router igrp autonomous-system | Enables the indicated IGRP routing process on a router. |
| show interface [ type number ] | Displays the configured and monitored characteristics of an interface. |
| show ip route [ address [ mask ]][ protocol [ process-ID ]] | Displays the current routing table as a whole or by entry. |
| timers basic update invalid holddown flush [ sleeptime ] | Adjusts EGP, RIP, or IGRP process timers. |
| traffic-share { balanced min } | Specifies whether an IGRP or EIGRP routing process should use unequal -cost load balancing or equal cost only. |
| validate-update-source | Toggles the source address validation function of RIP and IGRP routing processes. |
| variance multiplier | Specifies a multiplier by which a route metric can vary from the lowest -cost metric and still be included in an unequal-cost load balancing group . |