Section 6: DLSw+ (6 Points) Configure DLSw+ with TCP encapsulation between R6-R4 and R6-R5. R4 should only be able to connect to R6 VLAN2 and R5 to VLAN5. If the DLSw+ connection from R4-R6 fails, allow R4 to connect to VLAN2 via R1. If the primary connection to R6 is restored, only keep the new connection to VLAN2 active for 60 seconds. R4 and R5 should show reachability of NetBIOS name ccie advertised from R6. This is the only NetBIOS name of which R6 should have visibility.
|