Configure BGP, as shown in Figure 1-14, with the following peering: R3R2, R8R2, R6R2, R6R8, R7R8, R6R5. Ensure the most suitable interfaces are used to maintain resilience for BGP peering (except for R2 and R3, use 172.16.0.0/16 addresses for all peering to and from these routers). Figure 1-14. IP EGP Diagram
Ensure minimal configuration on R8. Inject the following networks into BGP via new loopback interfaces: R3: 20.200.200.1/24 and 20.20.20.1/24 R5: 20.20.20.1/24 and 200.20.20.1/24 R7: 30.30.30.30/29 Ensure that R6 BGP routing table prefers to use AS1000 for network 20.20.20.0/24; do not use BGP weight, BGP local preference, MED, neighbor metric related statements, metric manipulation, summarization, or pre-pending to achieve this. Perform configuration on R6 only. All BGP speakers are to be able to communicate with all advertised BGP networks.
|