CCNA Portable Command Guide

2017-07-07 02:10:07

`Router(config)#no router igrp` `as-number`	Disables the IGRP routing process
`Router(config-router)#no network` `w.x.y.z`	Removes network w.x.y.z from the IGRP routing process
`Router(config-if)#bandwidth` `x`	Sets the bandwidth of this interface to x kilobits to allow IGRP to make a better routing decision
`Router(config-router)#variance` `x`	Allows IGRP to accept unequal-cost routes

Tip:

The bandwidth command is used for metric calculations only. It does not change interface performance.

Категории