Router(config)#router eigrp 100 | Turns on the EIGRP process | | | 100 is the autonomous system (AS) number, which can be a number between 1 and 65535 | | | All routers in the same AS must use the same AS number | Router(config-router)#network 10.0.0.0 | Specifies which network to advertise in EIGRP | Router(config-router)#eigrp log-neighbor-changes | Logs any changes to an EIGRP neighbor adjacency |
Tip: The eigrp log-neighbor-changes command, although optional, is recommended to help with troubleshooting. Router(config-router)#no network 10.0.0.0 | Removes the network from the EIGRP process | Router(config)#no eigrp 100 | Disables routing process 100 | Router(config-if)#bandwidth x | Sets the bandwidth of this interface to x kilobits to allow EIGRP to make a better routing decision |
Tip: The bandwidth command is used for metric calculations only. It does not change interface performance. |