Windows XP Cookbook (Cookbooks)

2017-07-07 02:10:07

Problem

You want to view the open ports and connections on a system.

Solution

Using downloadable software

The Sysinternals TCPView tool is a graphical interface that displays all of the active connections on a host. It displays all of the connection information you might need, including process name and ID, protocol, local address and port, and remote address and port. It is a real-time tool, so it shows connections that are terminating in red, and new connections in green. You can close a connection by right-clicking it and selecting Close Connection. You can also kill the associated process by selecting End Process. See Figure 12-1 for a screenshot of TCPView.

Figure 12-1. Sysinternals TCPView screenshot

Using a command-line interface

The netstat command displays all established connections on a host:

> netstat

Use the -a option to view all open ports, regardless if they are active. With the Windows XP version of netstat, you can view the process ID associated with connections by specifying the -o option.

The Sysinternals netstatp utility is the command line version of TCPView. It displays similar information to netstat, but it shows the process name and ID associated with the connection by default:

> netstatp

Using VBScript

' This code produces output very similar to the 'netstat -an' command. ' It requires that the target system have SNMP and the WMI SNMP ' Provider installed. ' ------ SCRIPT CONFIGURATION ------ strComputerIP = "127.0.0.1" ' ------ END CONFIGURATION --------- set objLocator = CreateObject("WbemScripting.SWbemLocator") set objWMI = objLocator.ConnectServer("", "root/snmp/localhost") set objNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet") objNamedValueSet.Add "AgentAddress", strComputerIP objNamedValueSet.Add "AgentReadCommunityName", "public" objNamedValueSet.Add "AgentWriteCommunityName", "public" WScript.Echo " Proto Local Address Foreign Address State" set colTCPConns = objWMI.Instancesof("SNMP_RFC1213_MIB_tcpConnTable",, _ objNamedValueSet ) for each objConn in colTCPConns WScript.echo " TCP " & objConn.tcpConnLocalAddress & ":" & _ objConn.tcpConnLocalPort & _ " " & objConn.tcpConnRemAddress & ":" & _ objConn.tcpConnRemPort & " " & objConn.tcpConnState next set colUDPConns = objWMI.Instancesof("SNMP_RFC1213_MIB_udpTable",, _ objNamedValueSet ) for each objConn in colUDPConns WScript.echo " UDP " & objConn.udpLocalAddress & ":" & _ objConn.udpLocalPort & " *:*" next

Discussion

When you take a look at the list of open connections on a system, you may be surprised to see so many. Unless the system is extremely busy, most should be in the Listening state, which simply means the port is open and waiting for a connection. For more on the various states that a connection may be in, see MS KB 137984.