Rick Gallahers MPLS Training Guide: Building Multi Protocol Label Switching Networks
Chapter 1: The Fundamentals of MPLS Networks and Data Flow
- Table 1.1: MPLS LER Table
- Table 1.2: LER Instruction Set
- Table 1.3: Label Switch Router's Label Information Base (LIB)
- Table 1.4: Switching Table for Router 1
- Table 1.5: Switching Table for Router 2
- Table 1.6: Switching Table for Router 3
- Table 1.7: Switching Table for Router 4
- Table 1.8: Switching Table for Router 5
Chapter 2: MPLS Label Distribution
- Table 2.1: FEC Database
- Table 2.2: Free Label
- Table 2.3: FEC to NHLFE
- Table 2.4: NHLFE
- Table 2.5
- Table 2.6: Possible Session States
- A reference sheet from RFC 3036
- TLV Summary
Chapter 3: MPLS Signaling
- Table 3.1: CR-LDP vs. RSVP-TE
Chapter 5: MPLS Traffic Engineering
- Table 5.1: Traffic Engineering Calculations for Example 1
- Table 5.2: Traffic Engineering Calculations for Example 2
- Table 5.3: Traffic Engineering Calculations for Example 3
Chapter 7: Virtual Private Networks and MPLS
- Table 7.1: Comparison of Tunnel Protocols
- Table 7.2: RFC 2547 Summary
- Table 7.3: Virtual Routing Summary
- Table 7.4: VPWS Summary
- Table 7.5: VPLS Summary
- Table 7.6: IPLS Summary
- Table 7.7: Martini Summary
- Table 7.8: Kompella Summary
- Table 7.9: AToM Summary
- Table 7.10: IP Addresses at Each Site
Chapter 9: MPLS Marketing
- Table 9.1: Atlanta Area Market Segmentation (by Firm Size)
- Table 9.2: Acme Target Market Share Goals
- Table 9.3: Locations per Customer Segment
- Table 9.4: Key Service Characteristics
- Table 9.5: Per-PoP Architecture
- Table 9.6: VPN Capacity Assumptions
- Table 9.7: Chassis Needed per Edge PoP and Drivers for Additional Chassis
- Table 9.8: Summary Operational Cost Metrics
- Table 9.9: Financial and Capital Assumptions
Appendix A: Answer Key for Chapter Exercises
- Table 1.4: Switching Table for Router 1
- Table 1.5: Switching Table for Router 2
- Table 1.6: Switching Table for Router 3
- Table 1.7: Switching Table for Router 4
- Table 1.8: Switching table for Router 5
- A reference sheet from RFC 3036
- TLV Summary