Absolute Beginners Guide to A+ Certification. Covers the Hardware and Operating Systems Exam

PrepLogic is designed to be user friendly and intuitive. Because the software has a smooth learning curve, your time is maximized because you start practicing almost immediately. PrepLogic Practice Exams, Preview Edition has two major modes of study: Practice Test and Flash Review.

Using Practice Test mode, you can develop your test-taking abilities as well as your knowledge through the use of the Show Answer option. While you are taking the test, you can expose the answers along with a detailed explanation of why the given answers are right or wrong. This gives you the ability to better understand the material presented.

Flash Review is designed to reinforce exam topics rather than quiz you. In this mode, you will be shown a series of questions but no answer choices. Instead, you will be given a button that reveals the correct answer to the question and a full explanation for that answer.

Starting a Practice Test Mode Session

Practice Test mode enables you to control the exam experience in ways that actual certification exams do not allow:

• Enable Show Answer Button ” Activates the Show Answer button, enabling you to view the correct answer(s) and full explanation(s) for each question during the exam. When not enabled, you must wait until after your exam has been graded to view the correct answer(s) and explanation.

• Enable Item Review Button ” Activates the Item Review button, enabling you to view your answer choices, marked questions, and to facilitate navigation between questions.

• Randomize Choices ” Randomize answer choices from one exam session to the next . Makes memorizing question choices more difficult, therefore keeping questions fresh and challenging longer.

To begin studying in Practice Test mode, click the Practice Test radio button from the main exam customization screen. This enables the options detailed in the preceding list.

To your left, you are presented with the option of selecting the preconfigured Practice Test or creating your own Custom Test. The preconfigured test has a fixed time limit and number of questions. Custom Tests enable you to configure the time limit and the number of questions in your exam.

The Preview Edition included with this book includes a single, preconfigured Practice Test. Get the complete set of challenging PrepLogic Practice Tests at PrepLogic.com and make certain you're ready for the big exam.

Click the Begin Exam button to begin your exam.

Starting a Flash Review Mode Session

Flash Review mode provides you with an easy way to reinforce topics covered in the practice questions. To begin studying in Flash Review mode, click the Flash Review radio button from the main exam customization screen. Select either the preconfigured Practice Test or create your own Custom Test.

Click the Best Exam button to begin your Flash Review of the exam questions.

Standard PrepLogic Practice Exams, Preview Edition Options

The following list describes the function of each of the buttons you see. Depending on the options, some of the buttons will be grayed out and inaccessible or missing completely. Buttons that are appropriate are active. The buttons are as follows :

• Exhibit ” This button is visible if an exhibit is provided to support the question. An exhibit is an image that provides supplemental information necessary to answer the question.

• Item Review ” This button leaves the question window and opens the Item Review screen. From this screen you will see all questions, your answers, and your marked items. You will also see correct answers listed here when appropriate.

• Show Answer ” This option displays the correct answer with an explanation of why it is correct. If you select this option, the current question is not scored.

• Mark Item ” Check this box to tag a question you need to review further. You can view and navigate your Marked Items by clicking the Item Review button (if enabled). When grading your exam, you will be notified if you have marked items remaining.

• Previous Item ” View the previous question.

• Next Item ” View the next question.

• Grade Exam ” When you have completed your exam, click to end your exam and view your detailed score report. If you have unanswered or marked items remaining, you will be asked if you would like to continue taking your exam or view your exam report.

Time Remaining

If the test is timed, the time remaining is displayed on the upper-right corner of the application screen. It counts down minutes and seconds remaining to complete the test. If you run out of time, you will be asked if you want to continue taking the test or if you want to end your exam.

Your Examination Score Report

The Examination Score Report screen appears when the Practice Test mode ends ”as the result of time expiration, completion of all questions, or your decision to terminate early.

This screen provides you with a graphical display of your test score with a breakdown of scores by topic domain. The graphical display at the top of the screen compares your overall score with the PrepLogic Exam Competency Score.

The PrepLogic Exam Competency Score reflects the level of subject competency required to pass this vendor's exam. Although this score does not directly translate to a passing score, consistently matching or exceeding this score does suggest you possess the knowledge to pass the actual vendor exam.

Reviewing Your Exam

From Your Score Report screen, you can review the exam that you just completed by clicking on the View Items button. Navigate through the items, viewing the questions, your answers, the correct answers, and the explanations for those questions. You can return to Your Score Report by clicking the View Items button.