AutoCAD 2004. One Step at a Time (Part 1)

I've modified an earlier project for our first Lesson 17 exercise. This should give you some frame of reference when you compare different modifying commands and methods .

  1. Open the Cabin-adv.dwg file in the C:\Steps\Lesson16 folder.

    1.1    

    Using the objects provided, the Grips commands, and your preferences in the Options dialog box, complete the drawing shown in Figure 16.5.1a.

    Figure 16.5.1a:

     

    1.2    

    Save the drawing as MyCabin-adv.dwg in the C:\Steps\Lesson16 folder.

  2. Start a new drawing from scratch.

    2.1    

    Use the following setup:

    2.1.1    

    Grid: ½

     

    2.1.2    

    Snap and Layers : as needed

     

    2.1.3    

    Font: Times New Roman

     

    2.1.4    

    Dimension styles: as needed

     

    2.2    

    Save the drawing as MyGasket in the C:\Steps\Lesson16 folder.

     

    2.3    

    Create the drawing shown in Figure 16.5.2a.

    Figure 16.5.2a:

  3. Start a new drawing from scratch.

    3.1    

    Use the setup described in 2.1.

     

    3.2    

    Save the drawing as MySlottedGuide in the C:\Steps\Lesson16 folder.

     

    3.3    

    Create the drawing shown in Figure 16.5.3a.

    Figure 16.5.3a:

  4. Start a new drawing from scratch.

    4.1    

    Repeat the setup you did in Exercises 2 and 3.

     

    4.2    

    Save the drawing as MySpring in the C:\Steps\Lesson16 folder.

     

    4.3    

    Create the drawing shown in Figure 16.5.4a.

    Figure 16.5.4a:

  5. Create and dimension the drawing in Figure 16.5.5a. The grid is set to ¼". Use appropriate layers.

    Figure 16.5.5a:

  6. Using the bottle detail shown in Figure 16.5.6a, create the drawing of the spice rack in Figure 16.5.6b. The grid is 1/8". Fully dimension the drawing (not the bottles) and use appropriate layers.

    Figure 16.5.6a:

    Figure 16.5.6b:

Related

Категории