3D AutoCAD 2004/2005: One Step at a Time
|
| < Day Day Up > |
|
We're going to recreate the project we did in Lesson 18, but this time our blocks will contain attributes that we'll use to create a bill of materials for our drawing.
-
Begin by opening the Blocks-arch.dwg file in the C:\Steps\Lesson19 folder. Notice that the drawings have already been created for you.
1.1
Create attributes for each (on the Text layer) as indicated in the chart that follows. Then WBlock each to the C:\Steps\Lesson19\Library folder (create this folder if it isn't already there). (Use the same insertion points you used in Lesson 19.)
Mode
Block
Tag
I
C
V
P
Prompt
Default Value
Text Justify
Door36-at
Type
Y
N
N
N
What type is it?
Flush
Door36-at
Size
N
N
N
N
What size is it?
Center
Door36-at
Mfgr
Y
N
N
N
Who made it?
Ideal
Door36-at
MfrID
Y
N
N
N
What is the ID?
Door36i-at
Type
Y
N
N
N
What type is it?
Flush
Door36i-at
Size
N
N
N
N
What size is it?
Center
Door36i-at
Mfgr
Y
N
N
N
Who made it?
Ideal
Door36i-at
MfrID
Y
N
N
N
What is the ID?
Door30-at
Type
Y
N
N
N
What type is it?
Flush
Door30-at
Size
N
N
N
N
What size is it?
Center
Door30-at
Mfgr
Y
N
N
N
Who made it?
Ideal
Door30-at
MfrID
Y
N
N
N
What is the ID?
Win-at
Type
Y
N
N
N
What type is it?
DH
Win-at
Size
N
N
N
N
What size is it?
Center
Win-at
Mfgr
Y
N
N
N
Who made it?
Anderson
Win-at
MfrID
Y
N
N
N
What is the ID?
Sink-at
Type
Y
N
N
N
What type is it?
Lav
Sink-at
Size
Y
N
N
N
What size is it?
18x30
Sink-at
Mfgr
Y
N
N
N
Who made it?
American
Sink-at
MfrID
Y
N
N
N
What is the ID?
W-POR-LA010
Tub-at
Type
Y
N
N
N
What type is it?
Tub
Tub-at
Size
Y
N
N
N
What size is it?
30x60
Tub-at
Mfgr
Y
N
N
N
Who made it?
American
Tub-at
MfrID
Y
N
N
N
What is the ID?
T/S030
WC-at
Type
Y
N
N
N
What type is it?
WC
WC-at
Mfgr
Y
N
N
N
Who made it?
American
WC-at
MfrID
Y
N
N
N
What is the ID?
W-PORWC001
WH-at
Type
Y
N
N
N
What type is it?
WH
WH-at
Size
Y
N
N
N
What size is it?
50gal
WH-at
Mfgr
Y
N
N
N
Who made it?
American
WH-at
MfrID
Y
N
N
N
What is the ID?
E52
1.2
When inserting the blocks, include the following information.
Block
Type
Size
Mfr
MfrID
door36-at
Flush
36"
Ideal
X-SOL-36
door36i-at
Flush
36"
Ideal
I-HOL-36
Door30-at
Flush
30"
Ideal
I-HOL-30
Win-at
DH
42x24
Anderson
2-DH-S
Win-at
DH
42x35
Anderson
2-DH-M
Win-at
DH
42x74
Anderson
2-DH-L
Sink-at
Lav
18x30
American
W-PORLA010
Tub-at
Tub
30x60
American
T/S030
WC-at
WC
American
W-POR-001
WH-at
WH
50gal
American
E52
1.3
Open the FlrPln 19.dwg file in the C:\Steps\Lesson19 folder.
1.4
Create a layer called Plumbing for the fixtures. Make it Red.
1.5
Insert the blocks as shown in Figure 19.7.1.10a.
1.6
Create a template file to be used to extract the information shown in the bill of materials. Save the file as ArchTemp.txt to the C:\Steps\Lesson19\Library folder.
1.7
Extract attribute data to a space delimited file called MyData.txt to the C:\Steps\Lesson19 folder.
1.8
Arrange the data as seen on the finished drawing (Figure 19.7.1.8a).
Windows Block Type Size Manufacturer ID WIN-AT DH 42X24 Anderson 2-HD-S WIN-AT DH 42X35 Anderson 2-HD-M WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L WIN-AT DH 42X74 Anderson 2-HD-L Doors Block Type Size Manufacturer ID DOOR30-AT Flush 30" Ideal I-HOL-30 DOOR30-AT Flush 30" Ideal I-HOL-30 DOOR30-AT Flush 30" Ideal I-HOL-30 DOOR30-AT Flush 30" Ideal I-HOL-30 DOOR36I-AT Flush 36" Ideal X-SOL-36 DOOR36I-AT Flush 36" Ideal X-SOL-36 DOOR36I-AT Flush 36" Ideal I-SOL-36 DOOR36I-AT Flush 36" Ideal I-SOL-36 DOOR36I-AT Flush 36" Ideal I-HOL-36 DOOR36I-AT Flush 36" Ideal I-HOL-36 DOOR36I-AT Flush 36" Ideal I-HOL-36 DOOR36I-AT Flush 36" Ideal I-HOL-36 DOOR36I-AT Flush 36" Ideal I-HOL-36 Plumbing Fixtures Block Type Size Manufacturer ID TUB-AT Tub 30x60 American T/S030 TUB-AT Tub 30x60 American T/S030 SINK-AT Lav 18x30 American W-POR-LA010 SINK-AT Lav 18x30 American W-POR-LA010 SINK-AT Lav 18x30 American W-POR-LA010 WC-AT WC American W-POR-WC001 WC-AT WC American W-POR-WC001 WH-AT WH 50gal American E-52
Figure 19.7.1.8a: Bill of Materials1.9
Import the data into the lower right corner drawing as shown on the final drawing (Figure 19.7.1.10a).
Figure 19.7.1.10a: Completed Drawing 1.10
Save the drawing as MyFlrPln20.dwg in the C:\Steps\Lesson19 folder.
-
Using what you've learned, create the next two drawings (Figure 19.7.2a and 19.7.2b) using attributes to create the lists (BOM and Valve List). If you've access to a database program (MS Access or DBase, for example), create a database file of information for each drawing. Both are on 34"x22" sheets of paper and are NTS.
Figure 19.7.2a: Sample PID Figure 19.7.2b: Bioelectrifier
|
| < Day Day Up > |
|