Fibre Channel for Mass Storage

5.1 CONTROLLER IC's

5.1.1 Overview

Hewlett-Packard began shipping the TACHYON IC in early 1995 and today, TACHYON is the industry's leading Fibre Channel controller. HP has carried this leadership forward with the Tachyon TL IC, a 64-bit PCI-to-Fibre Channel controller, that focuses on arbritrated loop topologies for cost-effective , Fibre Channel mass storage designs. Both of these IC's implement the TACHYON family architecture, which is a complete hardware-based design that delivers on the true performance capabilities of Fibre Channel.

5.1.2 TACHYON

Controller IC

HPFC-5000C

The Industry's Leading Fibre Channel Controller IC

5.1.2.1 Product Highlights

• Single chip Fibre Channel interface

• Supports both networking and mass storage implementations

• Complete hardware-based design uniquely optimized for Fibre Channel performance

• Released to production June 1996

5.1.2.2 Description

The TACHYON controller IC, HPFC-5000C, supports Arbitrated Loop, fabric, and point-to-point topologies; Class 1, 2 and 3 services; and supports quarter, half, and full-speed Fibre Channel data rates. The IC also provides on-chip support of FCP for SCSI initiators and targets and hardware assists for TCP/UDP/IP networking. Performance is optimized within the IC through complete concurrency with eight internal DMA channels and full duplex processing.

The TACHYON IC is unique in the industry with its level of maturity, interoperability, and broad design-in activity. First released by HP to customers for development in early 1995, the TACHYON IC is currently designed-in by more than 30 OEMs and has become the defacto controller IC choice for Fibre Channel.

* Special conditions apply regarding the sale of the TACHYON IC. Contact your local HP Components Sales Representative for details.

5.1.3 TACHYON TL Fibre Channel Arbitrated Loop Controller HPFC-5100

(For more infor mation, send an email with your address and telephone number to hsio@hp.com.)

5.1.3.1 Features

• Second generation controller IC, based on HP's TACHYON architecture

• Targeted to Fibre Channel Arbitrated Loop (FC-AL) designs, including Public Loop Support

• Supports both Class 2 and 3

• 1 Gigabit/second Fibre Channel rate

• Full Duplex support with parallel inbound and outbound processing

• 32/64-bit PCI interface, compliant to PCI v2.1

• Complete hardware handling of entire SCSI I/O via FCP on-chip assists

• Full Initiator and Target mode functionality

5.1.3.2 Description

The HPFC-5100, Tachyon TL, is a second-generation controller that leverages HP's extensive experience in Fibre Channel, established with the original TACHYON controller. Tachyon TL carries forward the assurance of interoperability and true Fibre Channel performance. Tachyon TL focuses on mass storage applications that require FC-AL, Class 3 and 2 (ACK0), and SCSI upper layer protocol handling. Coupled with a high performance 32/64-bit PCI bus interface, Tachyon TL provides a cost-effective, high performance mass storage solution.

Tachyon TL continues with the TACHYON architecture, a complete hardware-based state machine design. This architecture avoids on-chip microprocessor performance issues of a single processing resource, processor cycles per second, and access times to firmware. Rather, the TACHYON architecture is designed to realize the full potential of Fibre Channel. Tachyon TL provides the highest levels of concurrency by way of numerous independent functional blocks providing parallel processing of data, control and commands. In addition, these blocks process at hardware speeds versus firmware speeds and automate the entire SCSI I/O in hardware. The result is minimized latency and I/O overhead, coupled with the highest levels of parallelism to provide maximum I/O rates and bandwidth.

5.1.3.3 FC-AL Features

In addition to the high performance architecture, Tachyon TL offers second generation Fibre Channel features, such as Public Loop, Auto Status, multiple I/O's in the same loop arbitration cycle, loop map, loop broadcast, and loop directed reset. These features allow the designer to achieve higher performance in an arbitrated loop topology.

5.1.3.4 Physical Layer

The physical layer interface is the popular 10-bit wide specification that allows interfacing to a low-cost serializer/deserializer (SerDes) IC. This is the same physical layer interface that is popular on Fibre Channel disk drives today due to its quality gigabit signaling, small form factor, and low-cost.

5.1.3.5 Applications

• Motherboard integration

• Host Bus Adapters

• Storage Subsystems

• I2O designs

5.1.4 TACHYON Block Diagrams

TACHYON is a fundamental building block compatible with Hewlett-Packard's Fibre Channel solution which includes interface controllers, physical link modules, adapters, switches, and disk drives.

The TACHYON architecture supports both networking and mass storage connections to provide a low cost, high performance solution with low host overhead.

5.1.4.1 Features

• Single chip Fibre Channel intercace (no I/O processor required)

• Supports 1062.5, 531, and 266 MBaud links

• Supports three topologies; direct connect, fabric, and Fibre Channel Arbitrated Loop (FC-AL)

• Supports Fibre Channel Class 1,2, and 3 Services

• Supports up to 2-Kbyte frame payload for all classes of service

• Sequence segmentation/reassembly in hardware

• Automatic ACK frame generation and processing

• On-chip support of FCP for SCSI Initiators and Targets

• Supports up to 16,384 concurrent SCSI I/O transactions

• Compliant with Interned MIB-II network management

• Direct interface to industry standard 10 and 20-bit Gigabit Link Modules (GLM)

• Hardware assists for TCP/UDP/IP networking

• Parity protectin on internal data path

• Eight internal DMA channels

• Full duplex internal architecture that allows TACHYON to process inbound and outbound data simultaneously

5.1.4.2 Specifications

• System Clock Frequency:

  - 24 “40 MHz backplane operation

• Operating Temperature:

  - 0 “50 degrees C @ 0 m/s airflow

  - 0 “70 degrees C @ 1.5 m/s airflow

• Testability:

  - Full internal scan path

  - IEEE standard 1149.1 Boundary Scan

• Packaging:

  - 208-pin metal quad flat pack

• Standards:

  - Intended to be compliant with ANSI standards and FCSI/FCA profile defintions

5.1.4.3 Product Disclaimer

HP reserves the right to alter specifications, features, capabilities, functions, and even general availability of the product at any time. Special conditions apply regarding the sale of the Tachyon TL IC; For more information, send an email with your address and telephone number to hsio@hp.com.