The following questions test your knowledge of topics explained in this chapter. You can find the answers to the questions in Appendix A, "Answers to Chapter Review Questions."
| 1. | Which type of trunk connects two local telephone company COs? tie trunk CO trunk interoffice trunk OPX trunk
|
| 2. | What type of "tone" is used by a touch-tone phone to dial digits? CAS DTMF SF TDM
|
| 3. | Which multiplexing process is used by TDM? Timeslots are assigned to different channels, regardless of whether there is data to transmit. Timeslots are assigned to different channels depending on which traffic has a higher priority at that time. All timeslots are used by the channel that is transmitting data at that time. Timeslots are assigned to the channel that starts transmitting first and are used by the other channels as timeslots become available.
|
| |
| 4. | DSL is an example of which style of multiplexing? frequency-division phase-division time-division statistical time-division
|
| 5. | When discussing call control, what function does call setup use to ensure that there is enough bandwidth to place a call? call routing call maintenance call supervision Call Admission Control
|
| 6. | Which two protocols are examples of distributed call control? MGCP H.323 SIP Megaco
|
| 7. | In the centralized call control model, signaling is performed by which component? gateway gatekeeper MCU call agent
|
| |
| 8. | To what does the FXS interface provide a direct connection? CO E&M trunk telephone gatekeeper
|
| 9. | What is the function of the SRST component of a centralized voice enterprise network? Connects IP phones on remote sites to Cisco Unified CallManager Provides local call-processing capabilities in case of a WAN outage Configures routing plans for the gateways Serves as the primary voice path between sites
|
| 10. | An E1 interface can carry up to how many simultaneous conversations? 16 24 30 32
|