CCSP CSPFA Exam Cram 2 (Exam Cram 642-521)
| [SYMBOL] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X]
L2TP (Layer 2 Tunneling Protocol) VPN implementation LAN-based firewalls failovers 2nd clock settings 2nd commands configuring 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th connection settings IP address settings 2nd standby settings 2nd stateful example 2nd stateful settings system address settings layers OSI model packet filters 2nd proxy filters 2nd 3rd stateful packet filters table listing 2nd layers (OSI model) firewall filters 2nd packet filters 2nd proxy filters 2nd 3rd stateful packet filters licenses failover failovers 2nd restricted unrestricted listings conduit Commands for Multiple DMZ Servers (5.10) Configuring Primary Cable-based Failover IP Addresses (11.2) 2nd Configuring Primary LAN-based Failover IP Addresses (11.4) 2nd Configuring SNMP (7.4) 2nd Configuring username and passwords (10.1) Copying from a TFTP Server (4.11) Example of Configuring Secure NTP (7.3) Monitor Mode (4.3) 2nd Monitor Mode's tftp Command (4.12) 2nd nat and global Commands for Two Dynamic Mappings (5.4) NAT, PAT, and the global Command (5.6) 2nd NTP Server Configuration Example (7.2) Password Recovery Example (4.13) 2nd PAT and global Commands for Dynamic Mappings (5.5) 2nd PIX firewall configuration sample code (4.10) 2nd Port Redirection (5.11) 2nd Primary Firewall Cable-based Command (11.1) 2nd Primary Firewall LAN-based Commands (11.3) Remote Access Using PPTP (12.7) Secondary LAN-based Basic Configuration (11.6) 2nd Setting LAN-based Primary Firewall Commands (11.5) Static One-to-One Mapping (5.2) The conduit Command (5.9) The config terminal Command (4.2) The enable and disable Commands (4.1) The isakmp policy Command (12.3) 2nd The nat and global Commands for a Single Host (4.6) The nat and global Commands for a Single Host (4.7) The nat and global Commands for Multiple Interfaces (4.9) The nat and global Commands Used for Dynamic Mappings (5.3) The show activation-key Command (3.2) 2nd The show interface Output (4.4) 2nd The show version Command (3.1) The show version Command (4.5) 2nd The show xlate and show conn Commands (5.1) 2nd Using the clock set Command (7.1) Using the nat 0 Command (5.7) Using the nat 0 Command with an Access List (5.8) 2nd vpdn group commands Needed for PPTP Remote Access (12.8) 2nd 3rd loading PDM Startup Wizard 2nd 3rd logging additional resources exam prep questions 2nd 3rd 4th 5th 6th 7th PIX firewall information commands listing console port internal buffers severity levels 2nd 3rd SNMP management stations syslog servers 2nd logging buffered command logging host command 2nd logging monitor command logging on command 2nd logging standby command logging timestamp command logging trap command Login dialog box PDM connections
|