Cisco OSPF Command and Configuration Handbook (paperback)

 <  Free Open Study  >  

20-30 show ip ospf process-id flood-list int- name int-number

Syntax Description:

  • process-id ” The OSPF process ID. The range of values is 1 to 4,294,967,295.

  • int-name ” Interface name.

  • int-number ” Interface number.

Purpose: To display LSAs that are queued for flooding. An OSPF process ID can be used if more than one OSPF process is active using the form show ip ospf process-id flood-list. The output of this command can be filtered, using regular expressions, by one of the following forms:

show ip ospf flood-list begin regular-expression show ip ospf flood-list exclude regular-expression show ip ospf flood-list include regular-expression

Initial Cisco IOS Software Release: 12.0 (1)T

Example: Displaying All OSPF Floodlist Information

The following is a representative output from the show ip ospf flood-list EXEC command.

r4# show ip ospf flood-list OSPF Router with ID (4.4.4.4) (Process ID 1) Interface Serial0/0, Queue length 0 Interface Ethernet1/0, Queue length 0 Interface Ethernet0/0, Queue length 0 Interface Loopback0, Queue length 0

 <  Free Open Study  >  
Related

Категории