Microsoft Windows Server 2003 Insider Solutions

The Windows Internet Naming Service (WINS) has a long history in Microsoft networks. Because early Microsoft networks were primarily broadcast-based using protocols such as NetBEUI to identify local computers, and there is a need to maintain backwards compatibility for earlier operating systems, Microsoft continues to support WINS.

Legacy Microsoft NetBIOS Resolution

WINS is effectively a simple database of NetBIOS names and their corresponding IP addresses. Some additional information, such as domain name, server type, and so on, can be determined as well, from the 16th byte in a NetBIOS name stored in WINS.

WINS is considered legacy in the Microsoft world because NetBIOS resolution is being phased out in favor of the domain name system (DNS) form of name resolution. However, it is difficult to divorce WINS from modern networks because of the reliance on WINS by down-level (pre-Windows 2000) clients , legacy applications, and even some Microsoft services such as DFS that use WINS by default. Consequently, you might need to keep using WINS in Windows networks, unless you can definitively prove that it is no longer necessary.

Integrating WINS and DNS

DNS can use the WINS database to provide for quasi-DNS resolution of WINS clients. This means that if a request is sent to a DNS server to resolve client1.companyabc.com , for example, it is possible for that DNS server to use the WINS database to resolve requests for any zones where the WINS forward lookup is configured. If Client1 does not exist in the DNS database but exists in the WINS database instead, the DNS server will return the IP address that it obtained from WINS and attach the companyabc.com suffix to the record, as illustrated in Figure 13.35.

This functionality must be enabled on the DNS server because it is not configured by default. To enable WINS resolution on a DNS server, follow these steps:

1. On a server running DNS, open the DNS MMC snap-in by choosing Start, Administrative Tools, DNS.

2. Navigate to DNS\< Servername >\Forward Lookup Zones.

3. Right-click the zone in question and choose Properties.

4. Choose the WINS tab.

5. Check the Use WINS Forward Lookup box.

6. Enter the IP address of the WINS server(s) and click OK to save the changes, as illustrated in Figure 13.36.

   Figure 13.36. Configuring WINS resolution in DNS.

Changes in Windows Server 2003 WINS

Although =the overall function of WINS has not changed significantly in Windows Server 2003, some additions to the management tools allow for increased functionality and capabilities:

• Advanced search capabilities for WINS databases. Previous implementations of WINS had simplistic search capabilities that were limited to simple keyword searches of NetBIOS records in the database. The search engine for WINS has been updated in Windows Server 2003 to support more advanced search parameters, thus giving administrators more flexibility in searching for specific records.

• WINS pull record filtering and replication partner acceptance. Instead of entire transfers of all records on other servers, replication can be limited to only those records owned by a specific server, thus excluding extraneous records from littering a WINS database.

In addition to these advances in Windows Server 2003, Windows 2000 introduced enhancements to WINS, such as an updated database engine, persistent connections, manual tombstoning, and other improvements.