| 1: | The length of the HP-UX host name may be: -
8 characters maximum -
15 characters maximum -
16 characters maximum -
64 characters maximum |
| 2: | The HP-UX host name may contain: -
Letters only. -
Letters and numbers only. -
Letters, numbers, dash, and underscore characters. -
Letters, numbers, dash, underscore, and dot characters. |
| 3: | Which command is used for initial configuration of the system? -
the sysconfig command -
the set_parms command -
the configure command -
the setup command |
| 4: | Which statement is true? -
At the boot time, HP-UX starts installation if the installation CD is inside the drive. -
You need to interrupt the normal boot process and manually boot from a different boot device containing the installation media. After that, the install/recovery process starts, which can be used for a fresh installation. -
You need to interrupt the normal boot process and manually boot from the installation media. After that, you need to start the installation using the setup command. -
You need to interrupt the normal boot process and manually boot from the installation media. After that, you need to start the installation using the set_parms command. |
| 5: | How can you change the primary boot path ? -
use PDC -
use the mkboot command -
with the help of ISL -
use the set_parms command |
| 6: | Which command do you use in PDC to find the device name for a CD-ROM drive? -
find -
cdrom -
search -
list |
| 7: | You use the search command, and a list of devices is displayed as shown below. Which command will you use to boot from the CD-ROM? Path Number Device Path (dec) Device Type ----------- ----------------- ----------- P0 10/0/6 Random Access Media P1 10/0/5 Random Access Media P2 10/0/4 Random Access Media P3 10/0/3 Random Access Media P4 10/0/2 Random Access Media P5 10/0/1 Random Access Media P6 10/4/4.2 Toshiba CD-ROM Device P7 10/4/4.1 Sequential Access Media -
Boot P6 -
Boot 10/4/4.2 -
BO 10/4/4.2 -
all of the above |