JNCIP: Juniper Networks Certified Internet Professional Study Guide
|
|
- Oakley
-
A key determination protocol based on the Diffie-Hellman algorithm that provides added security, including authentication. Oakley was the key-exchange algorithm mandated for use with the initial version of ISAKMP, although various algorithms can be used. Oakley describes a series of key exchanges called 'modes' and details the services provided by each; for example, Perfect Forward Secrecy for keys, identity protection, and authentication. See also Internet Security Association and Key Management Protocol (ISAKMP).
- Open message
-
BGP message that allows two neighbors to negotiate the parameters of the peering session.
- OpenConfirm
-
BGP neighbor state that shows a valid Open message was received from the remote peer.
- OpenSent
-
BGP neighbor state that shows an Open message was sent to the remote peer and the local router is waiting for an Open message to be returned.
- Open Shortest Path First (OSPF)
-
A link-state IGP that makes routing decisions based on the shortest path first (SPF) algorithm (also referred to as the Dijkstra algorithm).
- Open System Interconnection (OSI)
-
Standard reference model for how messages are transmitted between two points on a network.
- operational mode
-
JUNOS software mode allowing a user to view statistics and information concerning the router's current operating status.
- Optical Carrier (OC)
-
In SONET, Optical Carrier levels indicate the transmission rate of digital signals on optical fiber.
- Origin
-
BGP attribute that describes the believability of a particular route. The router that first places the route into BGP should attempt to accurately describe the source of the route.
- orlonger
-
JUNOS software routing policy match type that represents all routes more specific than the given subnet, including the given subnet itself. It is similar to a mathematical greater-than-or-equals-to operation.
- OSPF Hello packet
-
Message sent by each OSPF router to each adjacent neighbor. It is used to establish and maintain the router's neighbor relationships.
- overlay network
-
Network design seen where a logical Layer 3 topology (IP subnets) is operating over a logical Layer 2 topology (ATM PVCs). Layers in the network do not have knowledge of each other, and each requires separate management and operation.
|
|