MAYA for Windows and MacIntosh

By using Maya's display options, you can change the way objects are viewed within the pane. You can view your scene in wireframe, smooth-shaded, flat-shaded, bounding-box, or points mode, and you can change your display options to match your current needs. Bounding-box and points mode, for example, can be used to speed interaction when tumbling around a complex scene. Wireframe mode is handy for selecting components (because you can see the components through the object), and smooth and flat shading can provide a more complete surface view (which makes it easier to model a surface). Each of the display options is useful for specific situations, so switching between them can improve workflow.

Included among the display options are hardware texturing and lighting options, which provide quick feedback when adding texture or lighting to a scene. Most of these settings have associated keyboard shortcuts.

You can display NURBS and Subdiv objects in one of three smoothness levels: rough, medium, or fine. (However, the display smoothness levels do not apply to polygonal objects.) Objects are displayed rough by default, but you can change the setting using the shortcuts described below. Choosing a setting of rough can ease component selection because fewer surface lines are shown. A fine setting comes closest to matching the final surfacewhich means this is the setting to use when you need to focus on fine details.

To change the display options from the Shading menu:

  • From the Shading menu in any pane, select one of the following shading options: Wireframe, Smooth Shade, Flat Shade, Bounding Box, or Points (Figure 2.52).

    Figure 2.52. The Shading menu controls the display mode for each individual pane.

Shading and smoothness shortcuts

= Rough smoothness (Figure 2.53)

Figure 2.53. Rough smoothness (left) shows the object in low resolution. Medium smoothness (middle) shows the object with some additional resolution but not enough to obstruct the view of the object. Fine smoothness (right) provides the closest representation of the surface's shape.

= Medium smoothness (Figure 2.53)

= Fine smoothness (Figure 2.53)

= Wireframe mode (Figure 2.54)

Figure 2.54. Wireframe mode allows you to see through objects and view their geometry on the front and back of the surface.

= Shaded mode (Figure 2.55)

Figure 2.55. Shaded mode presents the surface in gray by default to show its final skin.

= Hardware Texturing (Figure 2.56)

Figure 2.56. Hardware Texturing shows the surface textures within the pane.

= Hardware Lighting (Figure 2.57)

Figure 2.57. Hardware Lighting shows the scene's lighting scenario interactively within the pane by generalizing the effects that the lights would have on the scenesomewhat of a very rough version of the final render. The Hardware Lighting option can save large amounts of rendering time because you can see the results as soon as you change a light's position.

Using the View menu

The View menu lets you control what the camera is focused on inside a view pane (Figure 2.58). You can bookmark your current pane's viewpoint to later return to that camera angle. This option is most useful on the Persp view to return to a pre-defined or user-defined viewpoint.

Figure 2.58. The View menu is used to alter, save, and restore camera viewpoints.

To bookmark the current pane viewpoint:

1.

From the View menu inside any pane, select the Bookmarks > Edit Bookmarks menu item.

The Bookmark Editor window opens (Figure 2.59).

Figure 2.59. The Bookmark Editor is used to create user-defined camera angles.

2.

Click the New Bookmark button.

3.

In the Name field, type a new name for your bookmark (Figure 2.60).

Figure 2.60. The bookmark name is changed to dannys_camera.

4.

Click Apply, and then Close to complete the bookmark.

To access a bookmarked pane viewpoint:

  • From the View menu inside any pane, select the Bookmarks > (bookmark name) menu item (Figure 2.61).

    Figure 2.61. The saved view named dannys_camera is accessed by selecting View > Bookmarks > dannys_camera.

    The view returns to the bookmarked viewpoint.

The View menu is also used to select the camera you are currently looking through, as well as to frame selected objects into view.

To select the camera you are currently looking through:

From the View menu inside any pane, click the Select Camera menu item (Figure 2.62).

Figure 2.62. The View > Select Camera menu item is found at the top of any view pane.

The Camera you are looking through becomes selected, and the Attribute Editor for the camera opens on the right side of the interface (Figure 2.63).

Figure 2.63. The selected camera's Attribute Editor holds all of the camera settings.

    Related

    Категории