Case Study: Add an E1 R2 Connection to the Leeds Gateway
Review Questions
| 1 |
What is a major drawback of using analog FXO trunks for inbound calls? |
| 2 |
Which command must you include when configuring a CAMA type 4 (KP-NPD-NXX-XXXX-ST) trunk? |
| 3 |
You issue a show controller command on a digital trunk and see accumulated slip seconds in every interval. What could be the cause? |
| 4 |
When you are trying to set up Q.931 backhaul on an ISDN PRI using CallManager MGCP, the isdn bind-l3 ccm-manager command is not recognized. What could cause this? |
| 5 |
What must you do prior to configuring a PRI group on an ISDN PRI circuit? |
| 6 |
Which signaling type is necessary if you want to receive ANI information on a T1 CAS trunk? |
| 7 |
What are the two components of R2 signaling? |
| 8 |
If it is necessary to use the cas custom command to modify the signaling on an E1 R2 trunk, what is the recommended first step? |