Installing the Designer Client
Installing the Designer client is simple and can usually be completed in minutes. This section will summarize the installation process for Designer on a Microsoft Windows PC.
Note
You can download a free trial version of the Domino Designer client from the Lotus Web site. See the developerWorks Web link information at the end of this chapter.
|
A.2.1 |
These instructions are intended to be a brief summary for version 7.0 of the Designer client for Microsoft Windows®. Although the instructions, for the most part, are the same across versions, users should follow the instructions provided by Lotus when working with other versions or operating systems. Let's briefly review the system setup requirements.
Supported Microsoft Windows Platforms
- Microsoft® Windows® 98
- Microsoft® Windows® NT, Version 4.0
- Microsoft® Windows 2000® Professional
- Microsoft® Windows XP® Professional
Memory Requirements
- For Windows 98Minimum of 64MB RAM (128MB recommended)
- For Windows NTMinimum of 64MB RAM (128MB recommended)
- For Windows 2000Minimum of 128MB RAM (256MB recommended)
- For Windows XPMinimum of 128MB RAM (256MB recommended)
Disk Space Requirements
- 2MB for the Designer client
- 39MB for the Designer client help files
- Space for general application development
Before starting the installation process, you'll want to close all applications running on the Desktop. This is especially important if any Lotus products are running. Many Lotus products share files and could affect the installation process if they are running while installing the Designer application.
If you already have the Lotus Notes client installed, you'll want to back up a couple files. Make a copy of these files and store them in a different directory (or change the extension of the copied file to .BAK to store in the same directory). These files contain configuration information and could be overwritten during the installation process.
- NOTES.INI This file contains preferences for the Notes client application and is typically stored either in the C:WinNT or the C:LotusNotes directory.
- NAMES.NSF This file contains contact names, addresses, certificates, connection and location information and is typically stored in the C:LotusNotesData directory.
- DESKTOP.DSK This file contains preferences for the look and feel of your Lotus Notes workspace. This file is typically stored in the C:LotusNotesData directory. Note: Depending on the version installed, this file may be named desktop5.dsk or desktop6.dsk.
- USER.ID File This file identifies each person using Lotus Notes (where user represents a person's name). It contains your certificate keys, name, and password information. This file is typically stored in the c:LotusNotesData directory.
To install the Lotus Domino Designer, follow these steps. Readers should install the Lotus Notes client and obtain a valid user ID file and password prior to performing these steps.
|
1. |
Insert the Lotus Designer CD-ROM into the computer. If your computer is set up to auto-launch, the installation routine will start automatically. If the installation program does not start, click the Start button and choose Run from the Windows Desktop. Then enter the command drive:setup.exe (for example, d:setup.exe) and press Enter.
After the installation program starts, the Extracting Files dialog box will appear (see Figure 2.1). This process will copy a number of temporary files to your hard drive. If prompted to select a target directory, accept the default.
Figure 2.1. Domino Designer InstallShield startup |
|
2. |
A general welcome and installation wizard startup window will be displayed (see Figure 2.2). Click Next to continue the installation.
Figure 2.2. Domino Designer Install Wizard |
|
3. |
Carefully read the license agreement (see Figure 2.3). If you agree to the terms, click the I accept the terms in the license agreement radio button and click Next to continue.
Figure 2.3. Domino Designer License Agreement |
|
4. |
Specify your name and organization; for example, Joe User and IBM (see Figure 2.4). These fields can contain any text string and will not affect the installation of the Lotus products. Click Next to continue.
Figure 2.4. Domino Designer Customer Information |
|
5. |
Accept the default installation directory (which should be C:LotusNotes) and click Next to continue.
Tip Multiple versions of Lotus Notes, Designer, and Administrator can be installed on a workstation. Simply change the default installation location to have multiple software levels installed. Installing in an alternate directory will enable you to run two separate versions of the Lotus software. Refer to the installation manual provided with the Lotus products for additional information. |
|
6. |
At the installation options dialog, make sure the Domino Designer option is enabled. Options marked with an X will not be installed. Verify that the installation screen is similar to Figure 2.5.
Figure 2.5. Domino Designer Install Options If these items are not selected, click on the triangle to the left of the Domino Designer and Designer Help options. Select This feature will be installed on the local hard drive to install each of these features.
Click Next to continue.
|
|
7. |
The Ready to Install the Program dialog will display (see Figure 2.6). Click Install.
Figure 2.6. Domino Designer Ready to Install Confirmation |
|
8. |
When the installation is complete, Lotus displays the Installation Complete dialog box. Click Finish to return to the Microsoft Windows Desktop. Congratulations, setup is now complete!
|