Disabling IS-IS on an Interface

Problem

You want to temporarily turn off IS-IS on an interface.

Solution

Disable IS-IS on the interface:

[edit protocols isis] aviva@RouterG# set interface fe-1/0/1 disable

To start IS-IS again, remove the disable statement from the configuration:

[edit protocols isis] aviva@RouterG# delete disable aviva@RouterG# commit

Discussion

To remove an interface from the IS-IS network, you can disable it. Because you are only removing the interface temporarily, you don want to remove the configuration statements entirely. You see that the interface is down:

aviva@RouterG> show isis interface IS-IS interface database: Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric fe-0/0/1.0 3 0x2 RouterG.02 RouterG.02 10/10 fe-1/0/0.0 1 0x3 RouterA.02 Disabled 10/10 fe-1/0/1.0 3 0x1 Disabled Disabled 10/10 lo0.0 0 0x1 Passive Passive 0/0

Also, the adjacency to the neighbor is down:

aviva@RouterG> show isis adjacency Interface System L State Hold (secs) SNPA fe-0/0/1.0 RouterH 2 Up 26 0:5:85:c1:d1:d1 fe-1/0/0.0 RouterA 1 Up 6 0:5:85:ca:ca:70 fe-1/0/1.0 RouterJ 2 Down 0 0:5:85:c4:72:f5

Another way to disable IS-IS on an interface is with the deactivate command:

[edit protocols isis] aviva@RouterG# deactivate interface fe-1/0/1.0 aviva@RouterG# commit aviva@RouterG# show interface fe-0/0/1.0; interface fe-1/0/0.0 { level 2 disable; } inactive: interface fe-1/0/1.0; interface lo0.0; }

To start IS-IS again on the interface, reactivate it:

[edit protocols isis] aviva@RouterG# > activate interface fe-1/0/1 aviva@RouterG# commit

You can also temporarily disable OSPF on the router:

[edit protocols isis] aviva@RouterG# set disable aviva@RouterG# commit and-quit aviva@RouterG> show isis interface IS-IS instance is not running

Категории