CSC Architecture Benefits

Router(config-router)# neighbor ip-address send-label

Enables a BGP router to send MPLS labels with BGP routes to a neighboring BGP router. This command is configured in router configuration mode.

Router(config-route-map)# set mpls-label

Can be used only with the neighbor route-map out command to manage outbound route maps for a BGP session. Use the route-map global configuration command with match and set route-map configuration commands to define the conditions for redistributing routes from one routing protocol into another.

Router(config-route-map)# match mpls-label

Use this command in a route-map to select those routes that carry match labels.