Local Switching
Command Reference
Command |
Description |
---|---|
Router(config-if)# pvc vpi/vci l2transport |
Creates an ATM PVC to specify the encapsulation type on an ATM PVC. l2transport is used to specify that the PVC is switched and not terminated. |
Router(config-if)#xconnect destination vc-id encapsulation mpls |
Enables routing of AToM packets over a specified VC. |
Router(config)#connect connection-name interface dlci {interface dlci | l2transport} |
Defines connections between Frame Relay PVCs in global configuration mode. |
Router(config)#pseudowire-class class-name |
Creates a pseudo-wire class. |
Router(config-pw-class)# interworking {ethernet | ip} |
Enables L2 VPN Interworking. Use the interworking command in pseudo-wire class configuration mode. |
Router(config)#connect connection-name interface [dlci | pvc | pvp] interface [dlci | pvc | pvp] [interworking interworking-type] |
Creates Layer 2 data connections between two ports on the same router in global configuration mode. |
Router#show mpls l2transport vc [vcid vc-id] | [vc-id-min vc-id-max] [interface name [local-circuit-id]] [destination ip-address | name] [detail] |
Displays information about AToM VCs that have been enabled to route Layer 2 packets on a router. |