Static PE-CE Routing Command Reference

2017-11-03 09:05:09

Table 4-1 shows the static PE-CE routing configuration command summary.

Table 4-1. Static PE-CE Routing Command Reference
Command	Purpose
Router(config)#ip route vrf vrf-name prefix mask [next-hop-address] [interface interface-number] [global] [distance] [permanent] [tag tag]	Establishes static routes for a VPN VRF.
Router(config)#router bgp as-number	Configures the BGP routing process.
Router(config-router)#address-family ipv4 [unicast] vrf vrf-name	The address-family command puts the router in address family configuration submode. Within this submode, you can configure address family specific parameters for routing protocols, such as RIP and BGP, that can accommodate multiple Layer 3 address families.
Router(config-router-af)# redistribute static	Redistributes static routes.
Router(config-router-af)# redistribute connected	Redistributes connected interfaces in destination routing protocol.
Router(config-router-af)# network {network-number [mask network-mask] \| nsap-prefix} [route-map map-tag]	Specifies the networks to be advertised by the BGP and multiprotocol BGP routing processes.

Категории