Multilevel Precedence and Preemption

When a user logs in to a Cisco IP Phone using the Cisco CallManager Extension Mobility feature, what is pushed to the IP Phone?

1. the device profile associated with the physical port
2. an automatically generated device setting
3. a temporary default phone button template
4. the device profile associated with the user

Which two of the following are requirements to implement the MCID feature in a Cisco CallManager deployment? (Choose two.)

1. PRI service
2. critical alarm level
3. MCID-T
4. Cisco Emergency Responder Service
5. Defense Switched Network

What should you instruct users to do if they receive a fast-busy tone after accidentally entering an invalid client matter code?

1. wait for the prompt and rekey the correct code
2. call technical support
3. enter the correct code within 3 seconds
4. enter the authorization code first
5. press the Speed Dial button
6. hang up and try the call again

Which four configuration items would enable a user (User A) in a hotel guest room to view the name and number of a caller and prevent the caller from viewing the user A caller ID information? (Choose four.)

1. Connected Line ID Presentation Restricted
2. Connected Line ID Presentation Allowed
3. Connected Name Presentation Restricted
4. Connected Name Presentation Allowed
5. Calling Line ID Presentation Restricted
6. Calling Line ID Presentation Allowed
7. Calling Name Presentation Restricted
8. Calling Name Presentation Allowed

A user logs in to a phone using the CallManager Extension Mobility functionality. They later move to a different location and attempt to log in to another Cisco IP Phone while remaining logged in to the original phone. What behavior occurs if the CallManager Extension Mobility service parameters are left in the default configuration

1. The user will not be able to log in to the second phone.
2. The user will be able to log in to the second phone and remain logged in to the first IP Phone.
3. The user will be able to log in to the second phone and be automatically logged out of the first IP Phone.
4. The user will have to wait 8 hours for the first phone to log out before they are able to automatically log in at the second.

You are configuring a CallManager-based IPT network for a customer. They want to require users to dial traceable PIN numbers assigned to differing authorization levels to reach PSTN numbers causing toll charges. What Cisco CallManager feature will accomplish this?

1. CMC
2. CAC
3. FAQ
4. FAC

How is a user able to trigger MCID functions on any given call?

1. by dialing the MCID sequence configured in CallManager
2. by signaling using a hook-flash sequence on the phone
3. by pressing the MCID softkey
4. any of the above

What is the highest MLPP level you can assign in CallManager 4.1?

1. Priority
2. Immediate
3. Flash
4. Executive Override
5. Flash Override

You want to allow a Cisco IP Phone to override the call display restrictions configured inside your agency. What configuration setting will allow this?

1. the Calling Line ID Presentation configuration from the translation pattern configuration
2. the Calling Line ID Presentation configuration from the device configuration
3. the Ignore Presentation Indicators configuration from the translation pattern configuration
4. the Ignore Presentation Indicators configuration from the device configuration

You have created a default device profile for a Cisco IP Phone 7960. How do you assign this default device profile to your devices to enable Extension Mobility support?

1. Do nothing, the default device profile is automatically assigned.
2. You need to select the devices CallManager should apply the device profile to using the device profile Find/List Phones dialog box.
3. You must select the Use Current Device Settings for the Logged Out profile of the device.
4. You must create a specific user profile and assign it to the phone as the default.